CFNDK - MAGNOBOND 6663-1, A

  • MSDS: CFNDK
  • Manufacturer: MAGNOLIA PLASTICS INC
  • Product Name: MAGNOBOND 6663-1, A
  • National Stock Number: 8040-01-280-1461
Product Identification

Product ID:MAGNOBOND 6663-1, A
MSDS Date:09/12/1996
FSC:8040
NIIN:01-280-1461
Kit Part:Y
MSDS Number: CFNDK

Responsible Party
MAGNOLIA PLASTICS INC
5547 PEACHTREE INDUSTRIAL BLVD
CHAMBLEE, GA 30341-2234
US

Cage: 22121

Contractor
MAGNOLIA PLASTICS INC
CHAMBLEE, GA 30341-2234 US

Telephone: (770) 451-2777/(800) 457-4280

Cage: 22121

Ingredients

VINYL CYCLOHEXENE DIEPOXIDE (VCHD)

Fraction By Weight: 5-15.0%

ACGIH TLV: 10 PPM


EPOXY RESIN

CAS: 15336-82-0

RTECS: MT9191000

Fraction By Weight: 40-50.0%


ALUMINUM POWDER (SARA 313)

CAS: 22708-90-3

Fraction By Weight: 5-10.0%

ACGIH TLV: 10 MG/M3 NOT ESTABLI

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATION. SKIN: IRRITATION,
SENSITIZATION. INGEST: MODERATELY TOXIC.
Medical Cond Aggravated by Exposure:SKIN & EYE DISORDERS.

First Aid

First Aid:SKIN: REMOVE CONTAM CLOTHES. WASH BEFORE REUSE. WASH W/SOAP &
WATER. EYES: FLUSH W/WATER FOR 15 MINUTES, LIFT LIDS, GET MED AID.
INHAL: REMOVE TO FRESH AIR, GIVE OXYGEN IF NECESSARY. INGEST: DONT
INDU CE VOMIT, GIVE LARGE DOSES OF WATER, GET MED AID.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>200F,>93C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:USE NOSH APPROVED SCBA. COOL FIRE EXPOSED
CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:WIPE W/CLOTH OR COLLECT W/ABSORBENT MATERIAL.
FOR LARGE SPILL, DIKE/CONTAINERIZE. PUMP OR SHOVEL INTO SALVAGE
VESSELS.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY AREA. TIGHTLY CLOSE
CONTAINER. AVOID CONTACT W/SKIN/EYES. USE W/ADEQUATE VENT.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST, MECHANICAL (GENERAL).
Protective Gloves:IMPERVIOUS.
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES.
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS, EYEWASH STATION
& SAFETY SHOWER.
Supplemental Safety and Health
MORE INFORMATION ON FILE.

Chemical Properties

Boiling Pt:B.P. Text:>225F,>107C
Vapor Pres:NIL
Vapor Density:>1.0
Spec Gravity:1.54
Evaporation Rate & Reference:<1.0 (BUAC)
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:GRAY VISCOUS LIQUID.
Percent Volatiles by Volume:0.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS & BASES.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:LARGE MIXTURES IN BULK. CURING
PROCESS IS EXOTHERMIC.

Disposal

Waste Disposal Methods:CURE, THEN BURY OR INCINERATE. REMOVE TO WASTE
DISPOSAL SITE IN ACCORDANCE W/FEDERAL/STATE/LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.